Watch in HD. In this video series, I'll show you how to change the JTAG is done on an Xbox 360. This tutorial assumes knowledge of advanced electronics. DISCLAIMER: If, after following this tutorial, you make an Xbox 360 damaged and / or inpoerable accept any responsibility for its loss. Follow the instructions at your own risk. Please note the following requirements to complete this project: - A PC or laptop with LPTPort. - A CAT5 cable. - A cable or LPT connector. - A soldering iron. - Relatively good handling of the welder. - An Xbox 360 with a Xenon motherboard and a review panel to the 8xxx series. - Torx 8 and 10, and possibly a screwdriver. To identify the motherboard and Alekos determine the profitability of your console, you can refer to the following illustration: www.360-hq.com If your card power supply side is part of the first image and you do not have HDMI cableDoor, and a Xenon motherboard. Please do not ask me to downgrade the dashboard, help with the 10th Prestige glitch, or if there is a way for the change-JTAG, an application to update the console. To find your revision number of the dashboard, select "System Settings" under "My Xbox" on the dashboard. In the new window select "Console Settings" and then "System Information" .. The revision number of a dashboard console appears in the following format: "2.0.XXXX.0" (where x...
Keywords: microsoft, xbox, 360, mod, hack, JTAG, how, to, install, tutorial, part, soldering, wire, nandpro
No comments:
Post a Comment